HP Certification I HP0-P20 100% pass Certification, HP0-P20, pass

ann

VUE/Prometric Code: HP0-P20

Exam: HP-UX 11i v3 System Administration
Ver:V9.02  새로운 버전
Q&A:117 Q&As  새로운 문제
업그레이트:2010-04-22
HP0-P20 필요하신분 우리 홈페이지 들어와서 좀 보세요 .  새로운 버전 이니까 합격률 높은데요 .
100프로 입니다 . 점유률 도 100프로 입니다 .
이덤프 구매하시면 반드시 통과해야 말입니다 .
HP Certification I HP0-P20 시험 문제 먼저 보기 :
1. Which tool is used to configure VxVM volumes?
A. vea
B. VRTSexplorer
C. vxsvc
D. vxinstall
Answer: A
2. What are accurate descriptions of an inode? (Select two.)
A. is identified by a unique inode number within its parent directory
B. identifies the file system type
C. contains the file's permissions and attributes
D. is used by the kernel to find the file's data blocks
E. can be listed with the command ls -n
Answer: CD
3. Which command can be used to duplicate a disk?
A. tar
B. dd
C. fbackup
D. cpio
Answer: B
4. You need to add a new local printer to your system. The printer is an HP LaserJet using device file
/dev/lp. The name of the print queue will be my_lj. Which command should you use?
A. lpcreate -l -pmy_lj -v/dev/lp -sdisable
B. lpr -add -g7 -pmy_lj -mlaserjet -v/dev/lp
C. lpadd -pmy_lj -mdumb -v/dev/lp
D. lpadmin -pmy_lj -v/dev/lp -mlaserjet
Answer: D
5. How is an "alias" IP address used?
A. It is another (secondary) host using your host address.
B. It is a short form of the IP address used to simplify connections.
C. It is an additional IP address on a single NIC.
D. It is a duplicate (identical) address configured on two separate NICs on the same system.
Answer: C
6. Which function does the HP-UX CIFS Client provide?
A. mounts Windows file systems on an HP-UX system
B. mounts Windows CIFS-formatted disks on an HP-UX system
C. shares HP-UX CIFS formatted disks with Windows clients
D. shares HP-UX file systems with Windows clients
Answer: A
7. What is the default protocol version for NFS running on HP-UX 11i v3?
A. 1
B. 2
C. 3
D. 4
Answer: C
8. In which file should you set the DHCP_ENABLE variable to '1' to allow a client to use DHCP on boot?
A. /etc/nsswitch.conf
B. /etc/hosts
C. /etc/rc.config.d/netconf
D. /etc/rc.config.d/dhcp.conf
Answer: C
9. If you run the set_parms command without any options and do not get prompted for the IP address,
what could be the reason?
A. There are no additional network cards that need to be configured.
B. The /etc/rc.config.d/netconf file is missing or corrupted.
C. The ip_address option was not given when the command was issued.
D. There is no networking installed on the system.
Answer: D